RustStop™ RX100™ can be applied onto already painted surfaces, new steel surfaces, and, even rusted surfaces.

Once applied, RustStop™ RX100™ goes to work immediately. Firstly - it penetrates into every microscopic crack and crevice of the metal expelling any traces of moisture or oxygen. Secondly - as it dries, it completely seals the surface, thus preventing the moisture carrying oxygen from entering and also bonds with the metal.  Put simply, RustStop™ RX100™ suffocates the metal/rust – thus preventing the substrate from breathing.Once cured (up to 48 hours), RustStop™ RX100™ will dry to a flexible, water repellent, non-conducting, long-lasting coat that is capable of handling very high heat. (300 deg C) RustStop™ RX100™ is a non-toxic, non-flammable, solid-state coating, that does not crack or peel.

RustStop™ RX100™ dries to a transparent coat; therefore visual inspection of equipment and surfaces is not impaired.When applied as directed, a two-coat treatment of RustStop™ RX100™ will provide long-term rust protection under the harshest conditions.

Common Uses

Industrial: Wharf cranes; gantry’s; heavy-duty moving equipment; ships and boiler rooms; steel pipes; silos, roofs, cooling towers, tools etc. Heavy-duty equipment and machinery. All types of steel structures; stair cases; metal tanks; bridges; platforms; guard rails; off-shore oil rigs; steel towers. House roofs, gutters, sheds, fences, gates, and similar, both iron and aluminum.

Q:How does RustStop™ RX100™ work?

A:The secret behind the success of RustStop™ RX100™ lies in its deep penetrating action.  This amazing product cuts through existing rust, and sinks deep into the treated surface, penetrating microscopic cracks and crevices, thus bonding itself into the metal – attacking and stopping the corrosion at root level – exactly where it starts!”

  Q:Do I have to paint over RustStop™ RX100™ for it to be effective?
A:No, RustStop™ RX100 is designed to be a stand-alone protective coating and there is no need to paint over it.

 Q:Is RustStop™ RX100™ difficult to apply?
A:Not at all, RustStop™ RX100 is very simple to apply and can be done using a standard paintbrush, enamel roller or paint spray-gun.

 Q:How much surface preparation is needed?

A:Very little, you will need to remove any flaking and loose rust, and ensure the metal is dry and free from grease before application. RustStop™ RX100™ can be applied directly over existing rust and will penetrate and stop it from spreading any further.